NAVIGATION

LATEST NEWS

CONTACT US

Add: JiangSu Suzou city Wuzhong Distrit
Tel: 0512-69221573
Fax: 0512-69221573
Email: wirecut@coolwedm.com

Your position: Home > Molybdenum Wire cut edm

EDM Wire cut LT320

high efficiency
pricsion
Product description: Molybdenum Wire cut edm Travel 320*400*280mm,cutting efficiency 300mm²/min,Suzhou Chikai has researched and manufactured wire cut edm for 20 years.our products are wire cut edm machines,wire edm contr

Product introduction

Machinery Feature

1. The machine base is made from HT250 resin sand Casting,Twice heat treatment,and the T shape machine bed to keep the machine rigidity and service life.

2. The worktable’s thickness is increased 15mm higher than other peers,so the load of bench is 400kg

3. X,Y axis and wire drum are equipped with HIWIN linear guide-rails, Precision ball screws are installed in work-bench

4. ‘C’ shape structure frame of wire edm,that can

5. can prevent the wire cutting machine working fluid splashing out from working area.

6. Z axis is installed with molybdenum wire guider device,and it can go and down automatically according the work-piece thickness.

Control cabinet

1. The controller is equipped with Cool-cut edit and control system of wire cutting machine;Cool-cut can read the graphic with suffix name .DXF from Auto-CAD quickly.

2. Cool-cut system is based on Windows 10 and intelligent,which operator only need to enter work-piece’s material name,thickness and cutting times,then Cool-cut just can automatically control wire cutting machine to complete the processing task.

3. Non-resistance and non-electrolytic pulse power supply,which can make the temperature control cabinet not rising,even in the condition of high current processing.And the loss of molybdenum wire is 0.01mm,after processing metal material 300000 square millimeters.

4. Frequency control the rate and the running direction change of wire drum,which replaces the old high-fault machine electrical

5. It has five safety protection functions which are broken wire protection,worktable travel limit protection,short circuit back,wire drum travel limit protection,and anti electromagnetic interference

Wire edm Technology Parameters

Machine Item	Remarks	Unit	LT-320
Worktable Travel	X/Y Axis Travel	mm	320×400
Worktable Size	L×W	mm	550×680
Worktable load		Kg	400
Max work-piece thickness	H	mm	280
Taper angle	Circular cone	°/mm	±3°/100
Max.working speed	Cr12	mm²/min	200
Best working precision	Cr12,thickness of 40mm Diameter 10 mm	mm	<±0.005
Moving location precision	Travel 200mm	mm	0.008
Surface roughness	Once cutting	um	<2.5
Surface roughness	Multiple cutting	um	<0.8
Electrode Wire Speed	Molybdenum wire	M/S	2—11
Electrode Wire Diameter	Molybdenum wire	mm	0.12—0.20
Wire drum diameter	*	mm	180
Tank Capacity	*	L	100
Screw Pitch	X/Y Axis	Mm/coil	4/coil
Rate of work	*	KW	1.5
Power supply	3-phase	V/Hz	380/50
Machine Weight	*	Kg	1500
Machine Size	*	mm	1600×1400×1900
Control cabinet weight	*	Kg	100
Control cabinet size	*	mm	600×700×1900