Wire cut edm LT500

Product introduction

1.The machine base is made from HT250 resin sand Casting,Twice heat treatment,and the T shape machine bed to keep the machine rigidity and service life.

2.X,Y axis and wire drum are equipped with HIWIN linear guide-rails, Precision ball screws are installed in work-bench

3.‘C’ shape structure frame of wire edm,can prevent the wire cutting machine working fluid splashing out from working area.

4.Z axis is installed with molybdenum wire guider device,and it can go and down automatically according the work-piece thickness.

5.Bidirectional constant tension system for molybdenum wire can adjust the tension according the working requirement to ensure machining accuracy and roughness.

6.The laser interferometer is used to detect the machine X,Y axis verticality ,guide-way parallelism, and positioning accuracy of worktable.

Control cabinet

1. The controller is equipped with Cool-cut edit and control system of wire cutting machine;Cool-cut can read the graphic with suffix name .DXF from Auto-CAD quickly.

2. Cool-cut system is based on Windows 10 and intelligent,which operator only need to enter work-piece’s material name,thickness and cutting times,then Cool-cut just can automatically control wire cutting machine to complete the processing task.

3. Non-resistance and non-electrolytic pulse power supply,which can make the temperature control cabinet not rising,even in the condition of high current processing.And the loss of molybdenum wire is 0.01mm,after processing metal material 300000 square millimeters.

4. Frequency control the rate and the running direction change of wire drum,which replaces the old high-fault machine electrical

5. It has five safety protection functions which are broken wire protection,worktable travel limit protection,short circuit back,wire drum travel limit protection,and anti electromagnetic interference

6. X and Y axis of wire cutting machine can be closed loop controlled through get the feedback the data from digital display ruler to increase the machining accuracy.

Technology Parameters