Servo Wire cutting machine LT400

Product introduction

wire cut edm machine LT400 with servo motor feature

1. The wire edm base adopts T shape machine body,that is HT250 resin sand casting;and C type frame of machine can make the molybdenum wire run more stably than the traditional frame.

2. Double-nut ball screw and linear guide-way from HIWIN,which enable improve the processing accuracy and the worktable moving position accuracy.

3. X and Y Axis is driven by Panasonic/YASKAWA servo motor directly,there is no reverse gear error,After removing the bridge gear.The U and V Axis could be also installed Panasonic/YASKAWA servo motor optionally.

4. Hand control box could control the movement of X,Y,U,V Axes and the drive of the wire drum and high-pressure water pump quickly

5. Super wear resistant molybdenum wire guider is used to reduce the vibration of wire to achieve greatly good work-piece surface roughness.The guider could be adjusted distance automatically according the work-piece thickness

6. Cool-cut drawing and control software for wire edm is R&D by our company,which has a complete database and strong function for various of graphics,metal materials and conditions.

7. Non-resistive and non-electrolytic pulse supply can make the wire edm efficiency improve to 200mm²/min,and the best finished roughness is 0.8um(Cr12) after cutting three times;because of non-resistive,the temperature inside the control cabinet would not rise without heat exchanger.

8. There is a closed-loop system for X and Y Axis(worktable) movement,that the Cool-cut control software can automatically adjust the equivalent servo motor according the digital display ruler feedback information.so that get to higher precision.The cutting accuracy is less than ±0.004mm

Technology Parameters